NUK First Choice PP Bottle

1. Cleaning before first use

Before first use, disassemble the product, clean all components and place them in boiling water for 5 minutes. This is to ensure hygiene. Before each subsequent use, clean carefully to ensure hygiene. Sterilise as needed.

For cleaning, use the NUK bottle cleanser or a mild washing-up liquid and remove food residues also from hidden surfaces. Soak the product if necessary. Rinse thoroughly.

For boiling or steam sterilising, always dismantle the bottle into its components and leave it open to avoid deformation.

For sterilisation we recommend the NUK Steam Steriliser or NUK Microwave Steam Steriliser.

Carefully follow the instructions for the steriliser to avoid material damage.

2. Heating bottles

Never heat up or cool down closed bottles (risk of explosion/material damage).

Take extra care when microwave heating; localised overheating can occur. Always stir heated food and check the temperature before feeding.

3. Storage

Store dry and hygienic.

4. Replacement advice

Replace teats after 1–2 months for hygiene and safety reasons.

If the bottle is damaged from the inside (e.g. by scratches), it should be replaced for hygiene reasons.

Sterilising the bottle

When sterilising plastic bottles, do not exceed the maximum temperature of 100°C (see symbol on the bottle).

For boiling or steam sterilising, always dismantle the bottle into its components and leave it open to avoid deformation.

To prevent material damage, always follow the instructions for use of the steriliser.

Dishwasher?

Teats and bottles should not be cleaned in a dishwasher – dishwasher detergents can cause material damage.

For cleaning, use NUK bottle cleanser or a mild washing-up liquid and remove food residues also from hidden surfaces. Soak the product if necessary; do not scratch the inside of the bottle. Rinse thoroughly.

Important: Breastfeeding is best for babies.

For your child’s safety and health WARNING!

Always use this product with adult supervision.

Throw away at the first signs of damage or weakness.

Keep components not in use out of the reach of children.

Never attach cords, ribbons, laces or loose parts of clothing to the product. The child can be strangled.

Never use feeding teats as a soother.

When preparing infant formula or tea, always follow the food manufacturer’s instructions.

To retain vitamins and nutrients, the temperature should not exceed 60°C.

Only administer food and drink in the quantity and consistency recommended by the manufacturer.

From 5 months, gradually change your baby over to a beaker.

Always check food temperature before feeding.

For feeding teats

Inspect the feeding teat before each use and pull it in all directions.

Throw away at the first signs of damage or weakness.

Please softly squeeze vent and drinking hole/slit before each use to ensure that it is open.

Do not dip in medicine!

Continuous and prolonged sucking of fluids will cause tooth decay. Tooth decay in young children can occur even when non-sweetened fluids are used.

Do not leave the feeding teat or bottle in direct sunlight or heat, or leave in disinfectant (“sterilising solution”) for longer than recommended, as this may weaken the teat or damage the material.

Certain foodstuffs may discolour the material (e.g. carrot juice) or affect its odour (e.g. fennel tea). This has no effect on the fitness for use or safety of the product.

Temperature-based colour changing paints are sensitive to moist heat and descaler. They will fade over time if frequently subjected to evaporation or boiling out.

NUK baby bottles comply with EN 14350.

Please retain product information and article/LOT number for future use.

NUK accessories are only compatible within their respective product range.

MAPA GmbH, Industriestr. 21-25, 27404 Zeven, Germany www.nuk.com

Distributed in New Zealand by Rumina Natural Care Ltd — free call 0800 333 006 or info@rumina.co.nz.